2024 AGI MKX² 10 1063
- Year 2024
- Make AGI
- Model MKX² 10
2024 AGI MKX² 10 1063
2024 AGI MKX² 10 1063
The MKX² has been designed to handle the toughest conditions on your farm with ease.
Open discharge spout- More efficient flow
- 20% HP reduction
- New tapered bearing for increased lifespan
- Improved maneuverability
- Separate boot flight with removable shafts
- AR boot flight standard (13” and 16”)
- Hanger bearing supports boot flight and reduces noise
- Easier inspections and servicing with dual side boot clean-out doors (13”)
Features may include:
Open Discharge SpoutNew open discharge spout decreases horsepower requirements
TrussingAircraft cable trussing
A-FrameStable A-frame support (53'-83')
AxlesWide standing axles
Engine
Engine Power
Required (With Dry Wheat): 50-60 hp
PTO
PTO Type
Shaft: 14E constant velocity with 5/16" (8 mm) shear bolt
Drivetrain
Sprocket Chain
Hardened tooth sprocket with #60 chain
Wheels & Tires
Tires, Rear Specification
15" (38.1 cm)
Hydraulics
Hydraulic Type
Lift: Single 4" (10.2 cm) cylinder with 5/16" (0.8 cm) aircraft cable
Maximum Pressure
Required To Raise Auger: 1200 psi (82.7 bar)
Dimensions
Dimensions
Reach Lowered: 32'-3" (9.8 m) | Reach Halfway: 30'-6" (9.3 m) | Reach Raised: 26'-9" (8.2 m) | Reach To Lif Tarms: 24'-9" (7.5 m) | Reach To Wheels: 29'-4" (8.9 m) | Wheel Tread: 112" (2.8 m)
Height
Lowered: 11'-7" (3.5 m) | Halfway: 26'-3" (8 m) | Raised: 41'-6" (12.6 m) | At Lif Tarms: 16'-5" (5 m) | At Wheels: 19'-2" (5.8 m) | Low Profile Hopper: 10" (25.4 cm) with flat free tires
Hopper Width
Low Profile: 40" (101.6 cm)
Length
Low Profile Hopper: 60" (152.4 cm)
Transport Height
(18" Hitch): 13' 6" (4.1 m)
Capacities
Features
Parking Jack: 2000 lbs (907.2 kg) side wind
Features
Construction Material
Tube Gauge: 12 ga | Tube Connectors: Heavy-duty 3/16" (0.5 cm) angle flange | Main Flighting: 9" (22.9 cm) OD x 7 ga stretched and welded with Wear Edge TechnologyTM on critical points | Wear Edge Technologytm (Reinforced Flight): 1/4" (0.6 cm) plus 10 ga ribbon weld = 5/16" (0.8 cm) Wear Edge TechnologyTM on critical grain transfer points | Flighting Shaft: High strength 2" (5.1 cm) OD x 11 ga tubing square flight connection | Tube Trussing: 5/16" (0.8 cm) aircraft type galvanized steel cable | Undercarriage: 3" (7.6 cm) x 11 ga A-frame | Axle: 2 1/2" (6.4 Cm) X 2 1/2" (6.4 Cm) X 1/8" (0.3 Cm) Wall Square Tubing
Bearing Hanger Type
Upper: 2" (5.1 cm) taper roller bearing assembly | Lower: 1 1/2" (3.8 cm) pillow block greaseable ball bearing
Hub Type
4-bolt agricultural type