2024 AGI MKX² 13 1364
- Year 2024
- Make AGI
- Model MKX² 13
2024 AGI MKX² 13 1364
2024 AGI MKX² 13 1374
The MKX² has been designed to handle the toughest conditions on your farm with ease.
Open discharge spout- More efficient flow
- 20% HP reduction
- New tapered bearing for increased lifespan
- Improved maneuverability
- Separate boot flight with removable shafts
- AR boot flight standard (13” and 16”)
- Hanger bearing supports boot flight and reduces noise
- Easier inspections and servicing with dual side boot clean-out doors (13”)
Features may include:
Open Discharge SpoutNew open discharge spout decreases horsepower requirements
TrussingAircraft cable trussing
A-FrameStable A-frame support (53'-83')
AxlesWide standing axles
Engine
Engine Power
Required (With Dry Wheat): 85-100 hp
PTO
PTO Type
Shaft: 35E constant velocity with 3 /8" (1 cm) shear bolt
Drivetrain
Sprocket Chain
Hardened tooth sprocket with HD #80 chain
Wheels & Tires
Tires, Rear Specification
16' (40.6 cm) TRF
Hydraulics
Hydraulic Type
Lift: Dual 4" (10.2 cm) single acting cylinders with 5/16" (0.8 cm) aircraft cable
Maximum Pressure
Required To Raise Auger: 1600 psi (110.3 bar)
Dimensions
Dimensions
Ar Boot Flight: 1/4" (0.6 cm) | Reach Lowered: 31'-1" (9.5m) | Reach Halfway: 29'-11" (9.1 m) | Reach Raised: 27'-8" (8.4 m) | Reach To Lif Tarms: 26'-7" (8.1 m) | Reach To Wheels: 31'-11" (9.7 m) | Wheel Tread: 124" (315 cm)
Height
Lowered: 10'-2" (3.1 m) | Halfway: 26' (7.9 m) | Raised: 40'-3" (12.3 m) | At Lif Tarms: 15'-10" (4.8 m) | At Wheels: 17'-8" (5.4 m) | Low Profile Hopper: 10" (25.4 cm) with flat free tires
Hopper Width
Low Profile: 40" (101.6 cm)
Length
Low Profile Hopper: 60" (152.4 cm)
Transport Height
(18" Hitch): 12' 8" (3.9 m)
Capacities
Features
Parking Jack: 5000 lbs (2268 kg) side wind
Features
Construction Material
Tube Gauge: 12 ga | Tube Connectors: Heavy-duty ¼" (0.6 cm) angle flange | Main Flighting: 11 3/4" (29.8 cm) OD x 1/4" (0.6 cm) stretched and welded with Wear Edge TechnologyTM on critical points | Wear Edge Technologytm (Reinforced Flight): 1/4" (0.6 cm) plus 10 ga ribbon weld = 5/16" (0.8 cm) Wear Edge TechnologyTM on critical grain transfer points | Flighting Shaft: High strength 3" (7.6 cm) OD x 11 ga tubing square flight connection | Greaseless Hanger Bearing For Boot: 1 15/16" (4.9 cm) ID, triple seal | Tube Trussing: 3/8" (1 cm) aircraft type galvanized steel cable | Undercarriage: 4" (10.2 cm) x 11 ga A-frame | Axle: 3" (7.6 cm) x 3" (7.6 cm) square tubing
Bearing Hanger Type
Upper: 2" (5.1 cm) taper roller bearing assembly | Lower: Custom 2" (5.1 cm) taper roller bearing assembly
Hub Type
6-bolt agricultural type