2023 AGI MKX2 10 1053

Information

2023 AGI MKX2 10 1053

The MKX² has been designed to handle the toughest conditions on your farm with ease.

Features may include:

Open discharge spout
  • More efficient flow
  • 20% HP reduction
  • New tapered bearing for increased lifespan
Steerable axle
  • Improved maneuverability
Redesigned boot
  • Separate boot flight with removable shafts
  • AR boot flight standard (13” and 16”)
  • Hanger bearing supports boot flight and reduces noise
  • Easier inspections and servicing with dual side boot clean-out doors (13”)

Photos

Highlights

  • Vineland, Ontario
  • 2023
  • AGI
  • MKX2 10 1053
  • Available
  • Lowered: 10'-8" (3.3 m) | Halfway: 24'-6" (7.5 m) | Raised: 36'-7" (11.2 m) | At Lif Tarms: 14'-10" (4.5 m) | At Wheels: 16'-10" (5.1 m) | Low Profile Hopper: 10" (25.4 cm) with flat free tires

Specifications

  • 2023
  • AGI
  • MKX2 10
  • 1053
  • Grain Augers
  • Required (With Dry Wheat): 45-50 hp
  • Shaft: 14E constant velocity with 5/16" (8 mm) shear bolt
  • Hardened tooth sprocket with #60 chain
  • 15" (38.1 cm)
  • Lift: Single 4" (10.2 cm) cylinder with 5/16" (0.8 cm) aircraft cable
  • Required To Raise Auger: 1000 psi (68.9 bar)
  • Reach Lowered: 27'-1" (8.3 m) | Reach Halfway: 25'-1" (7.6 m) | Reach Raised: 22'-5" (6.8 m) | Reach To Lif Tarms: 21'-11" (6.7 m) | Reach To Wheels: 24'-7" (7.5 m) | Wheel Tread: 106" (2.7 M)
  • Lowered: 10'-8" (3.3 m) | Halfway: 24'-6" (7.5 m) | Raised: 36'-7" (11.2 m) | At Lif Tarms: 14'-10" (4.5 m) | At Wheels: 16'-10" (5.1 m) | Low Profile Hopper: 10" (25.4 cm) with flat free tires
  • Low Profile: 40" (101.6 cm)
  • Low Profile Hopper: 60" (152.4 cm)
  • (18" Hitch): 12' 6" (3.8 m)
  • Tube Gauge: 12 ga | Tube Connectors: Heavy-duty 3/16" (0.5 cm) angle flange | Main Flighting: 9" (22.9 cm) OD x 7 ga stretched and welded with Wear Edge TechnologyTM on critical points | Wear Edge Technologytm (Reinforced Flight): 1/4" (0.6 cm) plus 10 ga ribbon weld = 5/16" (0.8 cm) Wear Edge TechnologyTM on critical grain transfer points | Flighting Shaft: High strength 2" (5.1 cm) OD x 11 ga tubing square flight connection | Tube Trussing: 5/16" (0.8 cm) aircraft type galvanized steel cable | Undercarriage: 3" (7.6 cm) x 11 ga A-frame | Axle: 2 1/2" (6.4 Cm) X 2 1/2" (6.4 Cm) X 1/8" (0.3 Cm) Wall Square Tubing
  • Upper: 2" (5.1 cm) taper roller bearing assembly | Lower: 1 1/2" (3.8 cm) pillow block greaseable ball bearing
  • 4-bolt agricultural type