Current AGI Portable-Handling Augers MKX2 10 MKX2 10

2023 AGI MKX2 10 1063

2023 AGI MKX2 10 1063

Swipe to View More

  • Year 2023
  • Make AGI
  • Model MKX2 10
Shop AGI Pre-Owned
Product Details Specifications Photos
2023 AGI MKX2 10 1063

2023 AGI MKX2 10 1063

  • Year 2023
  • Manufacturer AGI
  • Model Name MKX2 10
  • Trim Name 1063
  • Generic Type (Primary) Grain Augers
  • Engine Power Required (With Dry Wheat): 50-60 hp

2023 AGI MKX2 10 1063

The MKX² has been designed to handle the toughest conditions on your farm with ease.

Features may include:

Open discharge spout
  • More efficient flow
  • 20% HP reduction
  • New tapered bearing for increased lifespan
Steerable axle
  • Improved maneuverability
Redesigned boot
  • Separate boot flight with removable shafts
  • AR boot flight standard (13” and 16”)
  • Hanger bearing supports boot flight and reduces noise
  • Easier inspections and servicing with dual side boot clean-out doors (13”)

Engine

Engine Power Required (With Dry Wheat): 50-60 hp

PTO

PTO Type Shaft: 14E constant velocity with 5/16" (8 mm) shear bolt

Drivetrain

Sprocket Chain Hardened tooth sprocket with #60 chain

Wheels & Tires

Tires, Rear Specification 15" (38.1 cm)

Hydraulics

Hydraulic Type Lift: Single 4" (10.2 cm) cylinder with 5/16" (0.8 cm) aircraft cable
Maximum Pressure Required To Raise Auger: 1200 psi (82.7 bar)

Dimensions

Dimensions Reach Lowered: 32'-3" (9.8 m) | Reach Halfway: 30'-6" (9.3 m) | Reach Raised: 26'-9" (8.2 m) | Reach To Lif Tarms: 24'-9" (7.5 m) | Reach To Wheels: 29'-4" (8.9 m) | Wheel Tread: 112" (2.8 m)
Height Lowered: 11'-7" (3.5 m) | Halfway: 26'-3" (8 m) | Raised: 41'-6" (12.6 m) | At Lif Tarms: 16'-5" (5 m) | At Wheels: 19'-2" (5.8 m) | Low Profile Hopper: 10" (25.4 cm) with flat free tires
Hopper Width Low Profile: 40" (101.6 cm)
Length Low Profile Hopper: 60" (152.4 cm)
Transport Height (18" Hitch): 13' 6" (4.1 m)

Capacities

Features Parking Jack: 2000 lbs (907.2 kg) side wind

Features

Construction Material Tube Gauge: 12 ga | Tube Connectors: Heavy-duty 3/16" (0.5 cm) angle flange | Main Flighting: 9" (22.9 cm) OD x 7 ga stretched and welded with Wear Edge TechnologyTM on critical points | Wear Edge Technologytm (Reinforced Flight): 1/4" (0.6 cm) plus 10 ga ribbon weld = 5/16" (0.8 cm) Wear Edge TechnologyTM on critical grain transfer points | Flighting Shaft: High strength 2" (5.1 cm) OD x 11 ga tubing square flight connection | Tube Trussing: 5/16" (0.8 cm) aircraft type galvanized steel cable | Undercarriage: 3" (7.6 cm) x 11 ga A-frame | Axle: 2 1/2" (6.4 Cm) X 2 1/2" (6.4 Cm) X 1/8" (0.3 Cm) Wall Square Tubing
Bearing Hanger Type Upper: 2" (5.1 cm) taper roller bearing assembly | Lower: 1 1/2" (3.8 cm) pillow block greaseable ball bearing
Hub Type 4-bolt agricultural type

Product Photography