2023 AGI MKX2 13 1364

Information

2023 AGI MKX2 13 1364

Features may include:

  • New open discharge spout decreases horsepower requirements
  • Aircraft cable trussing
  • Stable A-frame support (64'-114')
  • Wide standing axles
  • Rigid steel trussing (84' and up)

Photos

Highlights

  • Vineland, Ontario
  • 2023
  • AGI
  • MKX2 13 1364
  • Available
  • Lowered: 10'-2" (3.1 m) | Halfway: 26' (7.9 m) | Raised: 40'-3" (12.3 m) | At Lif Tarms: 15'-10" (4.8 m) | At Wheels: 17'-8" (5.4 m) | Low Profile Hopper: 10" (25.4 cm) with flat free tires

Specifications

  • 2023
  • AGI
  • MKX2 13
  • 1364
  • Grain Augers
  • Required (With Dry Wheat): 85-100 hp
  • Shaft: 35E constant velocity with 3 /8" (1 cm) shear bolt
  • Hardened tooth sprocket with HD #80 chain
  • 16' (40.6 cm) TRF
  • Lift: Dual 4" (10.2 cm) single acting cylinders with 5/16" (0.8 cm) aircraft cable
  • Required To Raise Auger: 1600 psi (110.3 bar)
  • Ar Boot Flight: 1/4" (0.6 cm) | Reach Lowered: 31'-1" (9.5m) | Reach Halfway: 29'-11" (9.1 m) | Reach Raised: 27'-8" (8.4 m) | Reach To Lif Tarms: 26'-7" (8.1 m) | Reach To Wheels: 31'-11" (9.7 m) | Wheel Tread: 124" (315 cm)
  • Lowered: 10'-2" (3.1 m) | Halfway: 26' (7.9 m) | Raised: 40'-3" (12.3 m) | At Lif Tarms: 15'-10" (4.8 m) | At Wheels: 17'-8" (5.4 m) | Low Profile Hopper: 10" (25.4 cm) with flat free tires
  • Low Profile: 40" (101.6 cm)
  • Low Profile Hopper: 60" (152.4 cm)
  • (18" Hitch): 12' 8" (3.9 m)
  • Tube Gauge: 12 ga | Tube Connectors: Heavy-duty ΒΌ" (0.6 cm) angle flange | Main Flighting: 11 3/4" (29.8 cm) OD x 1/4" (0.6 cm) stretched and welded with Wear Edge TechnologyTM on critical points | Wear Edge Technologytm (Reinforced Flight): 1/4" (0.6 cm) plus 10 ga ribbon weld = 5/16" (0.8 cm) Wear Edge TechnologyTM on critical grain transfer points | Flighting Shaft: High strength 3" (7.6 cm) OD x 11 ga tubing square flight connection | Greaseless Hanger Bearing For Boot: 1 15/16" (4.9 cm) ID, triple seal | Tube Trussing: 3/8" (1 cm) aircraft type galvanized steel cable | Undercarriage: 4" (10.2 cm) x 11 ga A-frame | Axle: 3" (7.6 cm) x 3" (7.6 cm) square tubing
  • Upper: 2" (5.1 cm) taper roller bearing assembly | Lower: Custom 2" (5.1 cm) taper roller bearing assembly
  • 6-bolt agricultural type