Current AGI Portable-Handling Augers MKX2 16 MKX2 16

2023 AGI MKX2 16 16105

2023 AGI MKX2 16 16105

Swipe to View More

  • Year 2023
  • Make AGI
  • Model MKX2 16
Shop AGI Pre-Owned
Product Details Specifications Photos
2023 AGI MKX2 16 16105

2023 AGI MKX2 16 16105

  • Year 2023
  • Manufacturer AGI
  • Model Name MKX2 16
  • Trim Name 16105
  • Generic Type (Primary) Grain Augers
  • Engine Power Required (With Dry Wheat): 170 - 200 hp

2023 AGI MKX2 16 16105

Features may include:

  • New open discharge spout
  • Rigid steel trussing
  • Stable A-frame support
  • Standard steerable axles

Engine

Engine Power Required (With Dry Wheat): 170 - 200 hp

PTO

PTO Type Shaft: 50E double CV with 2-bolt shear

Drivetrain

Gearbox Speed Reducer: Enclosed, cast casing, 1000 rpm reducing gearbox (540 rpm) with reversing capability

Wheels & Tires

Tires, Rear Specification 22.5" (57.2 cm) agricultural tires

Hydraulics

Hydraulic Type Lift: 2" (5.1cm) x 6 1/2" (16.5 cm) bore cylinders; 1/2" (1.3 cm) aircraft cable
Maximum Pressure Required To Raise Auger: 1700 psi (117.2 bar)

Dimensions

Dimensions Reach Lowered: 54'-10" (16.7 m) | Reach Halfway: 51'-3" (15.6 m) | Reach Raised: 40'-7" (12.4 m) | Reach To Lif Tarms: 32'-1" (9.8 m) | Reach To Wheels: 42'-8" (13 m) | Wheel Tread: 148" - 182" (375.9 - 462.3 cm)
Height Lowered: 12' (3.7 m) | Halfway: 42'-11" (13.1 m) | Raised: 77'-5" (23.6 m) | At Lif Tarms: 30'-2" (9.2 m) | At Wheels: 36'-5" (11.1 m) | Low Profile Hopper: 11" (27.9 cm) with flat free tires
Hopper Width Low Profile: 46 1/2" (121.9 cm
Length Low Profile Hopper: 68" (172.7 cm)
Transport Height (18" Hitch): 15' 6" (4.7 m)

Capacities

Features Parking Jack: 12,000 lbs (5443.1 kg)

Features

Construction Material Tube Gauge: 10 ga | Tube Connectors: 1/4" (0.6 cm) angle flange | Main Flighting: 15" (38.1 cm) x 1/4" (0.6 cm) stretched & welded | Wear Edge Technologytm (Reinforced Flight): 1/4" (0.6 cm) main flighting with Wear Edge TechnologyTM on critical grain transfer points | Ar Boot Flight: 1/4" (0.6 cm) | Flighting Shaft: 3.5" (8.9 cm) x 11 ga tubing; square flight connector | Greaseless Hanger Bearing For Boot: 2 3/8" (6 cm) ID, triple seal | Tube Trussing: 3.5" (8.9 cm) x 11 ga tubing; 1/2" (1.3 cm) cable stays | Undercarriage: 4" (10.2cm) x 8" (20.3cm) HSS tubing | Axle: 4" (10.2 cm) x 4" (10.2 cm) x 3/16" (0.5cm) tubing; 4" (10.2 cm) x 4" (10.2 cm) x 1/4" (0.6 cm) on extensions
Bearing Hanger Type Upper: 2" (5.1 cm) taper roller bearing assembly | Lower:
Hub Type 8-bolt agricultural type

Product Photography