2024 AGI MKX2 16 16105
- Year 2024
- Make AGI
- Model MKX2 16
2024 AGI MKX2 16 16105
2024 AGI MKX2 16 16105
The MKX² has been designed to handle the toughest conditions on your farm with ease.
Open discharge spout- More efficient flow
- 20% HP reduction
- New tapered bearing for increased lifespan
- Improved maneuverability
- Separate boot flight with removable shafts
- AR boot flight standard (13” and 16”)
- Hanger bearing supports boot flight and reduces noise
- Easier inspections and servicing with dual side boot clean-out doors (13”)
Features may include:
Open Discharge SpoutNew open discharge spout decreases horsepower requirements
TrussingAircraft cable trussing
A-FrameStable A-frame support (53'-83')
AxlesWide standing axles
Engine
Engine Power
Required (With Dry Wheat): 170 - 200 hp
PTO
PTO Type
Shaft: 50E double CV with 2-bolt shear
Drivetrain
Gearbox
Speed Reducer: Enclosed, cast casing, 1000 rpm reducing gearbox (540 rpm) with reversing capability
Wheels & Tires
Tires, Rear Specification
22.5" (57.2 cm) agricultural tires
Hydraulics
Hydraulic Type
Lift: 2" (5.1cm) x 6 1/2" (16.5 cm) bore cylinders; 1/2" (1.3 cm) aircraft cable
Maximum Pressure
Required To Raise Auger: 1700 psi (117.2 bar)
Dimensions
Dimensions
Reach Lowered: 54'-10" (16.7 m) | Reach Halfway: 51'-3" (15.6 m) | Reach Raised: 40'-7" (12.4 m) | Reach To Lif Tarms: 32'-1" (9.8 m) | Reach To Wheels: 42'-8" (13 m) | Wheel Tread: 148" - 182" (375.9 - 462.3 cm)
Height
Lowered: 12' (3.7 m) | Halfway: 42'-11" (13.1 m) | Raised: 77'-5" (23.6 m) | At Lif Tarms: 30'-2" (9.2 m) | At Wheels: 36'-5" (11.1 m) | Low Profile Hopper: 11" (27.9 cm) with flat free tires
Hopper Width
Low Profile: 46 1/2" (121.9 cm
Length
Low Profile Hopper: 68" (172.7 cm)
Transport Height
(18" Hitch): 15' 6" (4.7 m)
Capacities
Features
Parking Jack: 12,000 lbs (5443.1 kg)
Features
Construction Material
Tube Gauge: 10 ga | Tube Connectors: 1/4" (0.6 cm) angle flange | Main Flighting: 15" (38.1 cm) x 1/4" (0.6 cm) stretched & welded | Wear Edge Technologytm (Reinforced Flight): 1/4" (0.6 cm) main flighting with Wear Edge TechnologyTM on critical grain transfer points | Ar Boot Flight: 1/4" (0.6 cm) | Flighting Shaft: 3.5" (8.9 cm) x 11 ga tubing; square flight connector | Greaseless Hanger Bearing For Boot: 2 3/8" (6 cm) ID, triple seal | Tube Trussing: 3.5" (8.9 cm) x 11 ga tubing; 1/2" (1.3 cm) cable stays | Undercarriage: 4" (10.2cm) x 8" (20.3cm) HSS tubing | Axle: 4" (10.2 cm) x 4" (10.2 cm) x 3/16" (0.5cm) tubing; 4" (10.2 cm) x 4" (10.2 cm) x 1/4" (0.6 cm) on extensions
Bearing Hanger Type
Upper: 2" (5.1 cm) taper roller bearing assembly | Lower:
Hub Type
8-bolt agricultural type