2023 AGI MKX2 16 16125

Information

2023 AGI MKX2 16 16125

Features may include:

  • New open discharge spout
  • Rigid steel trussing
  • Stable A-frame support
  • Standard steerable axles

Photos

Highlights

  • Vineland, Ontario
  • 2023
  • AGI
  • MKX2 16 16125
  • Available
  • Lowered: 14'-3" (4.3 m) | Halfway: 48'-6" (14.8 m) | Raised: 87'-10" (26.8 m) | At Lif Tarms: 31'-6" (9.6 m) | At Wheels: 37'-1" (11.3 m) | Low Profile Hopper: 11" (27.9 cm) with flat free tires

Specifications

  • 2023
  • AGI
  • MKX2 16
  • 16125
  • Grain Augers
  • Required (With Dry Wheat): 195 - 225 hp
  • Shaft: 50E double CV with 2-bolt shear
  • Speed Reducer: Enclosed, cast casing, 1000 rpm reducing gearbox (540 rpm) with reversing capability
  • 22.5" (57.2 cm) agricultural tires
  • Lift: 2" (5.1cm) x 6 1/2" (16.5 cm) bore cylinders; 1/2" (1.3 cm) aircraft cable
  • Required To Raise Auger: 2000 psi (137.9 bar)
  • Reach Lowered: 68'-8" (20.9 m) | Reach Halfway: 63'-8" (19.4 m) | Reach Raised: 48'-9" (14.9 m) | Reach To Lif Tarms: 44'-4" (13.5 m) | Reach To Wheels: 56'-9" (17.3 m) | Wheel Tread: 148" - 182" (375.9 - 462.3 cm)
  • Lowered: 14'-3" (4.3 m) | Halfway: 48'-6" (14.8 m) | Raised: 87'-10" (26.8 m) | At Lif Tarms: 31'-6" (9.6 m) | At Wheels: 37'-1" (11.3 m) | Low Profile Hopper: 11" (27.9 cm) with flat free tires
  • Low Profile: 46 1/2" (121.9 cm
  • Low Profile Hopper: 68" (172.7 cm)
  • (18" Hitch): 17' 6" (5.3 m)
  • Tube Gauge: 10 ga | Tube Connectors: 1/4" (0.6 cm) angle flange | Main Flighting: 15" (38.1 cm) x 1/4" (0.6 cm) stretched & welded | Wear Edge Technologytm (Reinforced Flight): 1/4" (0.6 cm) main flighting with Wear Edge TechnologyTM on critical grain transfer points | Ar Boot Flight: 1/4" (0.6 cm) | Flighting Shaft: 3.5" (8.9 cm) x 11 ga tubing; square flight connector | Greaseless Hanger Bearing For Boot: 2 3/8" (6 cm) ID, triple seal | Tube Trussing: 3.5" (8.9 cm) x 11 ga tubing; 1/2" (1.3 cm) cable stays | Undercarriage: 4" (10.2cm) x 8" (20.3cm) HSS tubing | Axle: 4" (10.2 cm) x 4" (10.2 cm) x 3/16" (0.5cm) tubing; 4" (10.2 cm) x 4" (10.2 cm) x 1/4" (0.6 cm) on extensions
  • Upper: 2" (5.1 cm) taper roller bearing assembly | Lower:
  • 8-bolt agricultural type