Red Trac International

Specifications

• 2023 AGI MKX2 16 1685
• Year2023
• ManufacturerAGI
• Model NameMKX2 16
• Trim Name1685
• Generic Type (Primary)Grain Augers
• Engine PowerRequired (With Dry Wheat): 150 - 175 hp
• PTO
• PTO TypeShaft: 50E double CV with 2-bolt shear
• Drivetrain
• GearboxSpeed Reducer: Enclosed, cast casing, 1000 rpm reducing gearbox (540 rpm) with reversing capability
• Wheels & Tires
• Tires, Rear Specification 22.5" (57.2 cm) agricultural tires
• Hydraulics
• Hydraulic TypeLift: 2" (5.1cm) x 4 1/2" (11.4 cm) cylinder with 3/8" (1 cm) cable
• Maximum PressureRequired To Raise Auger: 1800 psi (124.1 bar)
• DimensionsReach Lowered: 46' (14 m) | Reach Halfway: 43'-4" (13.2 m) | Reach Raised: 39'-10" (12.1 m) | Reach To Lif Tarms: 26'-4" (8 m) | Reach To Wheels: 31'-9" (9.7 m) | Wheel Tread: 148" - 182" (375.9 - 462.3 cm)
• HeightLowered: 12'-7" (3.8 m) | Halfway: 33'-4" (10.1 m) | Raised: 47'-3" (14.4 m) | At Lif Tarms: 23'-8" (7.2 m) | At Wheels: 28'-7" (8.7 m) | Low Profile Hopper: 11" (27.9 cm) with flat free tires
• Hopper WidthLow Profile: 46 1/2" (121.9 cm
• LengthLow Profile Hopper: 68" (172.7 cm)
• Transport Height(18" Hitch): 15' 6" (4.7 m)
• Capacities
• Features
• Construction MaterialTube Gauge: 10 ga | Tube Connectors: 1/4" (0.6 cm) angle flange | Main Flighting: 15" (38.1 cm) x 1/4" (0.6 cm) stretched & welded | Wear Edge Technologytm (Reinforced Flight): 1/4" (0.6 cm) main flighting with Wear Edge TechnologyTM on critical grain transfer points | Ar Boot Flight: 1/4" (0.6 cm) | Flighting Shaft: 3.5" (8.9 cm) x 11 ga tubing; square flight connector | Greaseless Hanger Bearing For Boot: 2 3/8" (6 cm) ID, triple seal | Tube Trussing: 3.5" (8.9 cm) x 11 ga tubing; 1/2" (1.3 cm) cable stays | Undercarriage: 4" (10.2cm) x 8" (20.3cm) HSS tubing | Axle: 4" (10.2 cm) x 4" (10.2 cm) x 3/16" (0.5cm) tubing; 4" (10.2 cm) x 4" (10.2 cm) x 1/4" (0.6 cm) on extensions
• Bearing Hanger TypeUpper: 2" (5.1 cm) taper roller bearing assembly | Lower:
• Hub Type8-bolt agricultural type