2023 AGI STX2 Truck Auger 10-41

Information

2023 AGI STX2 Truck Auger 10-41

Built for durability, longevity and capacity, AGI Westfield's redesigned STX² truck auger has been engineered to meet the demands of today’s grain operations.

Features may include:

  • Self-propelled heavy-duty mover

This narrow, more compact design allows better access to larger diameter hopper bins and offers drive controls situated closer to the motor to further increase reach under large hoppers. Hydraulic steering comes standard

  • Poly hoppers

Poly hoppers are durable and flexible providing easy grain handling with minimum spillage.

  • Steel intake hopper

The steel intake hopper is self-leveling and has a tapered transition that works with the flighting to direct the flow of grain from the hopper into the auger. The steel intake hopper has a removable access plate for easy cleanout and the flighting features Wear Edge Technology™. The steel intake hopper comes complete with a tow hitch.

  • Electric clutch with remote control

The electric clutch with remote control starts and stops the auger without shutting down the gas engine drives and is easy to install.

  • Reversing gearbox

The reversing gearbox allows the auger to be reversed at all angles and includes the linkage and lockout for easy cleanout.

Photos

Highlights

  • Vineland, Ontario
  • 2023
  • AGI
  • STX2 Truck Auger 10-41
  • Available
  • Reach Wheel A/B/C/D/E/F/G: 8' 4" / 16' 4" / 24' 6" / 16' 9" / 16' 5" / 15' 9" / 12' 3"

Specifications

  • 2023
  • AGI
  • STX2 Truck Auger
  • 10-41
  • General
  • Gas: 30 - 35 HP | Electri: 15 HP
  • Flighting: 10 GA Welded with Wear Edge TechnologyTM Lower Pitch for High Capacity
  • 1 ¼" OD x 11 GA Tubing | Bearings: 1 ¼" Oil Impregnated Hardwood Bearings
  • Top Drive: #80 Roller Chain & Hardened Steel Sprockets
  • Formed Steel Gears with Tapered Roller Bearings
  • 15"
  • 15" Agricultural
  • Lift Cable: ¼" Aircraft Type Galvanized Steel Cable
  • Lift: One
  • Wheel Tread: 96"
  • Reach Wheel A/B/C/D/E/F/G: 8' 4" / 16' 4" / 24' 6" / 16' 9" / 16' 5" / 15' 9" / 12' 3"
  • Winch: Reduction Geared with Automotive Brake
  • Tube Gauge: 12 GA | Tube Connectors: Heavy-duty ³/16" Angle Flange | Main Flighting: 9" OD x 7 GA Stretched + Welded | Wear Edge Technologytm (Reinforced Flight): | Flighting Shaft: High Strength 2" OD x 11 GA Tubing | Undercarriage: 2 ½" Square Tubing (Upper), 3" Square Tubing (Lower) | Axle: 2 ½" Square Tubing
  • Top Drive: 1 ¼" Cast Flange
  • 4 Bolt Agricultural Type Hubs
  • High Yield 11 GA Roll Formed | Shoe: 2 ¾" Steel Roller