2023 AGI X2 13 Scissor Lift 1374

Information

2023 AGI X2 13 Scissor Lift 1374

Features may include:

  • New open discharge spout decreases horsepower requirements
  • Aircraft cable trussing
  • Wide standing axles
  • Rigid steel trussing (84' and up)
  • Strong scissor-lift frame (74'-94')

Photos

Highlights

  • Vineland, Ontario
  • 2023
  • AGI
  • X2 13 Scissor Lift 1374
  • Available
  • Lowered A/B/C/D: 8'-9" (2.7 m) / 4'-6" (1.4 m) / 39'-8" (12.1 m) / 39'-8" (12.1 m) | Halfway A/B/C/D: 31'-2" (9.5 m) / 12'-7" (3.8 m) / 38'-3" (11.7 m) / 36'-7" (11.2 m) | Raised A/B/C/D: 49'-6" (15.1 m) / 24'-4" (7.4 m) / 32'-6" (9.9 m) / 30'-6" (9.3 m) | Low Profile Hopper: 10" (25.4 cm) with flat free tires

Specifications

  • 2023
  • AGI
  • X2 13 Scissor Lift
  • 1374
  • Grain Augers
  • Required (With Dry Wheat): 110-125 hp
  • Shaft: 35E constant velocity with 3 /8" (1 cm) shear bolt
  • Hardened tooth sprocket with HD #80 chain
  • 16" (40.6 cm) TRF
  • Lift: Two 4" (10.2 cm) single acting cylinders
  • Required To Raise Auger: 1500 psi (103.4 bar)
  • Wheel Tread: 146" - 182" (370.8 cm - 462.3 cm)
  • Lowered A/B/C/D: 8'-9" (2.7 m) / 4'-6" (1.4 m) / 39'-8" (12.1 m) / 39'-8" (12.1 m) | Halfway A/B/C/D: 31'-2" (9.5 m) / 12'-7" (3.8 m) / 38'-3" (11.7 m) / 36'-7" (11.2 m) | Raised A/B/C/D: 49'-6" (15.1 m) / 24'-4" (7.4 m) / 32'-6" (9.9 m) / 30'-6" (9.3 m) | Low Profile Hopper: 10" (25.4 cm) with flat free tires
  • Low Profile: 40" (101.6 cm)
  • Low Profile Hopper: 60" (152.4 cm)
  • (18" Hitch): 11' 6" (3.5 m)
  • Tube Gauge: 12 ga | Tube Connectors: Heavy-duty ΒΌ" (0.6 cm) angle flange | Main Flighting: 11 3/4" (29.8 cm) OD x 1/4" (0.6 cm) stretched and welded with Wear Edge TechnologyTM on critical points | Wear Edge Technologytm (Reinforced Flight): Hopper and incline tube | Ar Boot Flight: 1/4" (0.6 cm) | Greaseless Hanger Bearing For Boot: 1 15/16" (4.9 cm) ID, triple seal | Flighting Shaft: High strength 3" (7.6 cm) OD x 11 ga tubing square flight connection | Tube Trussing: 3/8" (1 cm) aircraft type galvanized steel cable | Undercarriage: 4" (10.2 cm) x 8" (20.3 cm) scissor lift | Axle: 3 1/2" (8.9 cm) x 3 1/2" (8.9 cm) tubing
  • Upper: 2" (5.1 cm) taper roller bearing assembly | Lower: Custom 2" (5.1 cm) taper roller bearing assembly
  • 6-bolt agricultural type