Red Trac International

  • 2695 Regional Rd #24 South
  • Vineland, ON L0R 2C0
  • Call Us: (905) 562-4136
  • https://www.redtrac.ca/
Print This Page

2024 Bush Hog® Single Flex-Wing Rotary Cutter 3810

Information

2024 Bush Hog® Single Flex-Wing Rotary Cutter 3810

HEAVIEST-DUTY RIGHT-OF-WAY SINGLE FLEX-WING

The right-hand wing model 3810 is easier to service and has features that maximize performance and durability in all uses. Made especially for highway right-of-way mowing or other areas where the Flex-Wing with a single wing is the best fit, the 3810 is unsurpassed in performance, durability, and reliability.

Features may include:

PERFORMANCE
  • Wing skids are 3/8” thick for extended wear and outside edges are turned up at 45° to stop heavy ground contact thatmight damage the sidebands.
  • Center section blades properly align with center wheels to closely cut out the bottom of ditches.
  • Grease fittings and spring steel bushings at axle pivot points for longer life.
  • Free wing float without movement of the hydraulic cylinder rod is 22° down and 45° up.
SAFETY
  • Highway safety lighting is standard.
CONSTRUCTION
  • Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan.
  • The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
  • Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.

Photos

Highlights

  • Vineland, Ontario
  • 2024
  • Bush Hog®
  • Single Flex-Wing Rotary Cutter 3810
  • Available
  • Cutting: 2" – 14"

Specifications

  • 2024
  • Bush Hog®
  • Single Flex-Wing Rotary Cutter
  • 3810
  • Rotary Cutters
  • Minimum Tractor: 60 hp
  • Input: Category 6 | Wing: Category 5
  • Transfer: 250 hp | Cutting: 225 hp
  • Axle: Springs @ Each Axle
  • Blade tip: 16,286 FPM
  • Perma-Level Or Ball Hitch
  • Cutting capacity: 4 1/2" | Sidebands: 1/4" X 13 1/2" | Blades: 1/2" X 4" | Center deck: 11 ga over 7 ga | Wing deck: 7 ga | Wing Cutting Angles: 22° Down and 45° Up | Blade holder: 7 ga Round
  • 10′ 6"
  • Cutting: 2" – 14"
  • 8′ 2"
  • 7′ 3"
  • 15′ 3"
  • Approximate: 5,500 lb. | Approximate Tongue: 1,900 lb.
  • Center & Wing Hydraulics: 3 Hoses Standard | Safety Tow Chain: Standard
  • Wing Level: Turnbuckles
  • 10-Year Gearbox Limited | 1 Year Machine Limited